Model JY-568JKGSC
Machine Size 8650*980*1820MM
Working pressure
0.6Mpa
Total Power 24KW
Feeding Speed
15-23 m/min
Electric Lift 0.37KW
Board thickness
10-60 mm
Board length
≧120 mm
Board width
≧60 mm
Edge Banding Tape Thickness 0.4-3 mm
Feature
JY-568JKGSC
Pre-milling
Diamond pre-milling cutter mills the corrugated marks and excess protrusions of the wooden board spiral cutting knife, so that the board edge fits the edge strip more tightly, and the bonding is stronger and more beautiful.
Double glue pot + pressing
Two sets of bottom glue pots can easily switch between deep and shallow edge banding tape.
End trimming
Fast Fast and stable, without hitting the board..
Rough Trimming
The rough trimming blade removes excess edge bands, forming rounded corners, which makes trimming more beautiful.
Fine Trimming
Fine trimming is to repair the board more carefully on the basis of rough trimming to make the board more beautiful.
Corner Chamfering
After edge banding, the four corners are cut into a small arc, which is smoother and does not hurt hands.
Scraping
Super hard alloy R blade, scrapes the fine lines of the edge band to make it smooth.
Flat Scraping
Light alloy flat knife, scrapes the edge band higher than the board surface and the excess glue residue on the board.
Double Buffing
The cloth wheel quickly polishes the edge of the edge band, and the polishing wheel has a larger use area and better polishing effect.
